This unique necklace was made by New Orleans jeweler, Thomas Mann whose designs are often referred to as "techno romantic". The necklace is 24" long and is 2" long x 1 3/4" wide at the center cat medallion. It is hand crafted from sterling silver and brass, and has a great design incorporating animals, windows, hands, hearts, and wings. It is in excellent condition and is hand signed "Thomas Mann" with his logo and sterling on the reverse.
This wonderful vintage necklace was made for the couture house of Yves Saint Laurent, and done in a limited edition of 500 pieces. The pendant is 3 1/4" wide x 3 1/4" long and is made from heavyweight metal with a gun metal finish. The front has a gold tone applique with teal epoxy enamel, and the reverse is signed "Yves Saint Laurent 086/500. It hangs from a 26" long serpentine brass chain and it is in very good condition.
This breathtaking necklace is from the couture label of Valentino Garavani. The top has a rigid section of two intertwined snakes measuring 2 1/4" wide in front. It has eight nesting strands of 8MM faceted tiger eye beads which drape down approximately 11" in front. The reverse side has two 12" long silk tassels which tied the necklace in back. It is in excellent condition and is signed "Valentino Garavani" on the reverse.
This colorful, lightweight necklace is a must-have accent for the season. This graduated link necklace is comprised of 38 resin links and measures a generous 19.5" in length. The necklace comes in 17 colors, so be sure and check the other listings to see the entire spectrum.
This unique necklace and earrings set was made for the couture collection of Giorgio Armani. The necklace fastens in front and is 46 long from end to end and the part that goes around the neck is 27". The coordinating earrings are 4" long x 1 1/4" wide at the bottom. All of the pieces have a bronze metal finish with both glass and acrylic beads in a beige color palette. The set has never been worn and still has the original paper drop tags. One earring is hallmarked "Giorgio Armani" and the...
This sophisticated vintage necklace and earrings set was made for the couture line of Giorgio Armani. The necklace has a wearable length of 16" and drapes down 13" in front while the coordinating earrings are 3 1/2" long x 1" wide. It black jet beads with large acrylic beads with a deep brown/violet tone. It has clear/crystal bead accents and copper tone metal findings. The set has the original paper drop tags and the earrings are signed "Giorgio Armani" while the necklace has the "GA" logo ...
This wonderful vintage necklace was designed by renowned costume jeweler, Kenneth Jay Lane. It is 18" long and has 3 gold medallions across the front, with the largest measuring 2 1/4" long x 1 3/4" wide. It has red and green glass beads resembling included emeralds and rubies and the metal panels have a gold tone finish. There is some light wear from age, but overall it is in very good condition. The reverse side is signed "KJL".
The lovely vintage bracelet measures 7" long and has 13 dangling puffy heart charms roughly measuring 5/8" long x 1/2" wide. There are a variety of designs on each heart including, US with uncle Sam hat, double hearts, double hearts with red enamel, the US capital building, and flowers. Some of the reverse sides are engraved with names including Dorre, Janet, Velma, Kathee, J.L, Alie, Faye, and Lenore. There is some light wear to the hearts, and one has a deep dent on the reverse. Overall,...
This charming (no pun intended) vintage bracelet measures 7 1/4" long and has 26 vintage puffy heart charms attached. One heart has a blue embedded stone, another has a mother of pearl background with grapes in enamel, and yet another has green enamel accents. The remaining 23 hearts are made from repousse sterling silver with intricate designs on the front. A few are engraved on the reverse with the names Poutsy, Jack, Mom, Dad, Sidney, Daddy, V. D. Gordon, G. C, and Bobbye. There is some m...
This wonderful vintage bakelite pin measures 4 1/2" long x 2 3/4" wide, and is made from applejuice bakelite. The top pin back is a branched log, and it has 3 carved logs and 3 maple leafs dangling from an applejuice celluloid chain. The pin assembly is secure, and the overall, the pin is in excellent condition.
This exciting pendant was designed by Felipe Barbosa of San Miguel, Mexico.
The pendant is 2 1/8" wide x 3" high. The pendant is comprised of gold & silver tone metal, with 6 epoxy sections, portraying various skeleton Katrinas in black & white. There are crystal & polished stone accents at all 4 points. In excellent condition, the pendant bears the Felipe Barbosa hallmark on the reverse side. Be sue and check out the marching earrings!
This interesting ring was designed by Felipe Barbosa of San Miguel, Mexico.
The ring measure 2 1/4"H x 1 3/8W and is made from silvertone metal and is embellished with 3 black crystals and 1 clear crystal. The ring has an adjustable shank and fits most. In new, unworn condition. A ring sure to garner its share of attention.
This stunning bracelet was designed by the Italian designer jeweler, Carlo Zini. His pieces are hard to find outside of Europe where he sells through exclusive boutiques and retailers like Harrod's. The bracelet is 3 3/4" wide in front and has an interior wearable length of 6 3/4". It has a rhodium finish and is intricately pave set with clear, gray, and black rhinestones. It is in excellent condition and is signed "Zini". Please see my other listings for the matching necklace.
This stunning necklace was designed by the Italian designer jeweler, Carlo Zini. His pieces are hard to find outside of Europe where he sells through exclusive boutiques and retailers like Harrod's. The necklace measures 16 long with an attached safety chain giving an additional 3 3/4" in length. Each octopus is approximately 2 1/2" long x 2" wide and all are intricately pave set with black, gray and clear rhinestones. It has a rhodium finish backing and the safety chain is signed "Carlo Zini"...
This charming vintage pin is 3" long x 3" wide and is made from carved black bakelite. The horse's profile has nice details in the carved mane, painted eye/nose, and yellow reins. It has some light loss of the yellow coating on the reins, but other than that, it is in very good condition.
This amazing fish pin was made by former designers to Iradj Moini, now working under their private label of C & D. This statement worthy fish pin is 5 1/2" long x 3" wide and is handcrafted from gilt brass wire with an antiqued finish. It has large carnelian cabochons on the body with faceted citrine stones on the fin. It is in excellent condition and is signed "C & D Jewelry" on an applied tag.
This fantastic oversized pin was made by the company, Cilea of Paris. The head designer, Stephane Ravel, creates each piece from resin, much in the manner of the renowned atelier, Vedie Monique. The pin is hand cut, bent, and hand painted. It measures a large 4" long x 3 1/2" wide, and is quite dimensional. The lightweight nature of the material makes the pin very easy to wear.
This fantastic oversized pin was made by the company, Cilea of Paris. The head designer, Stephane Ravel, creates each piece from resin, much in the manner of the renowned atelier, Vedie Monique. The pin is hand cut, bent, and hand painted. It measures a large 4" long x 2 3/4" wide, and is quite dimensional. The lightweight nature of the material makes the pin very easy to wear. Please note that these are sold individually, so please see my other listings for the other size.